POSITION SUMMARY

This position is accountable for supporting field operations at marine project locations for Delta Marine Construction. Incumbents are responsible for the operation of cranes and other hoisting equipment in the construction or repair of marine structures and dock facilities. Typically, they will work closely with the Project Superintendent, Barge Foreman, Welders, Boat Captain, Laborers, and other skilled or semi-skilled crafts persons.

SPECIFIC RESPONSIBILITIES

Works as assigned by the Barge Foreman to ensure the successful completion of on-going or new marine construction projects.
Assists in unloading and assembling of crane or other hoisting equipment to be used in marine construction activities.
Utilizes basic skills as a hook operator in swinging rig, raising and lowering crane boom, raising and lowering load lines on the crane.
Operates a hydraulic rubber tire or track crane equipped with a multiple part pick-up or single line hoist suspended from a boom by a cable.
Maneuvers and positions loads over designated areas in a smooth, safe manner.
Moves hand levers and depresses pedals to rotate chassis over lift load points.
Utilizes load charts to determine load and radius capabilities of the crane.
Assists in the installation of boom and hoisting cables on the hoisting equipment.
Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment.
Performs daily safety inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.
Ensures that crane boom is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation.
Works closely with Barge Foreman, Welders, Helpers, Laborers, and other skilled craft persons to complete current projects in a safe, efficient, and timely manner.
Participates in Safety and Environmental initiatives that will contribute to compliance with State/Federal regulations and improve existing Company programs.

EMPLOYEE SAFETY AND COMPLIANCE

Responsible and accountable for incumbent's own personal safety.
Responsible and accountable for the safety of all co-workers and any others incumbent comes in contact with.
Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed.
Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
Reports any and all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
Performs other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.).
All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary, or trade secret information belonging to the Company.

POSITION REQUIREMENTS

A minimum of two (2) years crane operations experience on land and on barges or any equivalent combination of experience and training which provides the necessary crane operations skills, knowledge, and abilities is required. The incumbent must:

Be certified by an ANSI accredited agency.
Understand the basic functions and operations of various types of pile hammers
- diesel, air, hydraulic, and drop hammers.
Be able to read, understand, and use crane load charts to determine load and radius capabilities of cranes.
Have general knowledge of construction rigging
- use of slings, cable chokers, spreader bars, multi-part load blocks, etc.
Be capable of successfully passing a crane operations certification test.

The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action up to and including termination of employment.

PHYSICAL/MENTAL REQUIREMENTS

The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation.

The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, respirators, ear plugs, steel-toed shoes, or other protective equipment as required by the work performed and location the work is being done.

This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate.

The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise.

In addition, Crane Operators must also be capable of:

Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which normally involves physically getting onto and off of work barges, boats, vessels, or dock facilities of varying heights and access parameters.
Visually seeing crane operations well (either naturally or with corrective lenses).
Standing, stooping, kneeling, squatting, climbing, or sitting for long periods of time.
Performing repetitive movements by feet, shoulders, arms, wrists, hands, and back in performance of work.
Climbing vertical ladders to heights of 40'-50'.
Working in confined spaces and at elevated heights.
Lifting objects up to 50 lbs. as required.
Carrying objects up to 50 lbs. as required.
Adapting to extreme temperature changes.
Adapting to outdoor conditions and prolonged exposure.
Remaining calm during emergencies and responding appropriately as dictated by the circumstance of the incident.

Job Type: Full-time

Pay: $24.00 - $35.00 per hour

Benefits:

Paid time off

License/Certification:

Driver's License (Required)

Willingness to travel:

25% (Required)

Work Location: In person

Delta Marine Construction, LLC

Latest Jobs

Friction Crane Operator