Welder/Fabricator

WESTERMAN INC • Bremen, Ohio, United States • $23 - $30 / hour • 2m ago

$2,500 Sign on Bonus

Westerman, an employee-owned company, is a multiple site manufacturer of production and storage equipment within the oil, gas, and nuclear industries. Our equipment helps optimize well pad design, improve separation efficiency and lower overall equipment spend through high-performance surface separation and processing technology. Our equipment is setting new standards for performance and economics nationwide.

SUMMARY The Welder is responsible for set-up and operation of advanced welding equipment. This position uses expertise to solve problems and eliminate scrap, rework and downtime while effectively repairing defective products. The appearance of the repair work must be at an acceptable level and meet high quality standards. The Welder is also responsible for making sure all work is done to specification. A successful candidate is a self-motivated multi-tasker that utilizes a strong work ethic to ensure all quality levels are met. This is a safety sensitive position.

PRIMARY RESPONSIBILITIES: Regular and punctual attendance at work is an essential job function of each position and is necessary to your individual effectiveness and that of your work group. Regular and punctual attendance is required of all employees.

Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
Fasten structural steel members to hoist cables, using chains, cables, or rope.
Hoist steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members.
Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
Force steel components into final positions, using turnbuckles, crowbars, jacks, or hand tools.
Pull, push, or pry steel components into approximate positions for bolting into place.
Unload and position prefabricated steel units for hoisting as needed.
Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
Dismantle structures or equipment.
Welding of separators, glycol absorbers, piping large and heavy wall vessels and flow coils. Must be able to perform quality x-ray welds on a consistent basis.
Welding low pressure products such as heaters, reboilers, glycol coolers, liquid accumulators, building skids and natural draft combustors
Lays out, positions, and secures parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler
Tack-welds or welds components and assemblies, using electric, gas, arc, or other welding equipment
Cuts workpiece, using powered saws, hand shears, or chipping knife
Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form
Installs or repairs equipment, such as lead pipes, valves, floors, and tank linings
Observes tests on welded surfaces, such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications
Inspects grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments
Removes rough spots from workpiece, using portable grinder, hand file, or scraper
Welds components in flat, vertical, or overhead positions
Single hand welding
Pipe Fitting
Performs other related duties as required and assigned.

KNOWLEDGE, SKILLS, AND ABILITIES :

Attention to detail and ability to make clean lines and cuts when welding
Read and interpret blueprints; understand how the final product should look
Identify flaws in welds or structural imperfections in the metal
Determine the kind of tools and equipment needed to do a job
Conduct tests and inspections of products, services, or processes to evaluate quality or performance
Perform routine maintenance on equipment and determining when and what kind of maintenance is needed
Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods.
Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade.
Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment.

QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty or responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

TO BE CONSIDERED FOR A WELDER POSITION:

EDUCATION

High School Diploma or equivalent

MINIMUM REQUIREMENTS

At least 1 year welding experience
Basic safety training.
Intermediate math skills and ability to read a tape measure required.
Must have a firm understanding of volts and amps and be able to adjust accordingly.
Basic data entry skills for maintenance breakdown calls.
Capability to read and interpret blueprints, work order instructions, weld symbols, and operate required tools involved in position.
Must understand and follow the quality policy and procedures – detect defects.
Troubleshooting skills.

PHYSICAL DEMANDS/ WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Must be able to sit or stand for extended periods of time, up to entire length of shift.
Must be able to exert moderate to heavy physical effort with lifting requirement up to 50 pounds.
Must have strong range of motion.
Must be able to sit, stand, reach, stoop, kneel, crouch, climb, and bend.
Must be able to see, speak, hear, and read.
Must be able to read instructions and all measuring devices.
Must use fingers and hands to manipulate tools and small parts.
Must be able to walk over both even and uneven surfaces.
Must be able to work in extreme temperatures, both hot and cold.
Must be able to wear appropriate PPE including seatbelt.
Must be physically able to access all areas of the plant and grounds.
Some aspects of this position may require working in tight quarters.
Some aspects of this position may require close vision, depth perception, the ability to see small detail, and the ability to adjust focus.

Related Jobs

Structural Steel Welder

Ohio Steel Industries • Full-time • Pataskala, Ohio, United States • $21 / hour • 4m ago

Welding & Fabrication

4m ago

Apply

Journeyman Electrician

Ultimate LLC • Full-time • Newark, Ohio, United States • $28 - $32 / hour • 3w ago

Electrical

3w ago

Apply

Lead Welder/Fabricator

Reliable Manufacturing Group Inc. • Full-time • Lancaster, Ohio, United States • $30 - $45 / hour • 1m ago

1m ago

Apply

Electrical Helper

Rightech • Full-time • Canal Winchester, Ohio, United States • $20 - $21 / hour • 1m ago

Electrical

1m ago

Apply

Commerical Refrigeration Technician

Saver Group Corp • Full-time • New Lexington, Ohio, United States • $48,102 - $64,931 / year • 1m ago

HVAC Refrigeration

1m ago

Apply

Carpenter/Laborer

Petre Enterprises LLC • Full-time • Somerset, Ohio, United States • $15 - $30 / hour • 1m ago

1m ago

Apply

HVAC Lead Installer: up to $5,000 SIGN ON BONUS

Five Star Heating & Cooling • Full-time • Canal Winchester, Ohio, United States • $25 - $35 / hour • 1m ago

HVAC

1m ago

Apply

Station Electrician C-A

AEP Service Corporation • Full-time • Heath, Ohio, United States • $31 - $58 / hour • 2m ago

Electrical

2m ago

Apply

Warehouse Forklift Operator

Crown Holdings • Full-time • Lancaster, Ohio, United States • $40,187 - $52,904 / year • 2m ago

2m ago

Apply

Gas Turbine Project Manager (Owner's Rep) - Data Center Construction

Kalcon USA • Full-time • Millersport, Ohio, United States • $140,000 - $200,000 / year • 3m ago

3m ago

Apply